INSTRUCTIONS:

Check fiber content of item to be tagged to be sure it can withstand the heat setting required for correct application.

• Wash garment before application.
• Heat dry iron for 5 minutes on "Cotton" setting.
• Cut SOCK SPOTS from sheet, rounding all corners.
• Select area on bottom of the instep of each sock.  If SOCK SPOT will cover a hole, place a piece of paper underneath hole before application.
• Work on a firm, protected surface and preheat and flatten area with iron.
• Positon SOCK SPOT, shiny side down on garment.
• Press firmly for 40 to 45 seconds.
• Allow SOCK SPOT to cool and check bond.
• Press again, if necessary.

WARRNING - Not recommended for use on nylon or rayon or fabrics made with monofilament (non-fibrous strand) polyester.

Powered by Anything Email